Tuesday, 19 June 2018
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: Power Harvesting in Prosthetic
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: Power Harvesting in Prosthetic: Power Harvesting The relation between the load resistance, power and the operating frequency. The harvested power is calculated from the ...
Power Harvesting in Prosthetic

Power Harvesting
The relation between the load resistance,power and the operating frequency. The
harvested power is calculated from the
measured voltage value by digital
oscilloscope and measured value of load
resistance directly.
Reference:
Ronsek
Piezoelectrics in Prosthetics
Monday, 21 May 2018
Piezoelectric harvesting from the prosthetic knee action
Piezoelectric harvesting from theprosthetic knee action
The PZT piezoelectric energy harvesting
connect with cables to vibrate the
piezoelectric. The cable connect from
piezoelectric and attach to the knee
mechanism. The cable will activate the PZT
piezoelectric to start harvest energy.
Reference:
Monday, 19 March 2018
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: Piezoelectric were installed underneath the prosth...
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: Piezoelectric were installed underneath the prosth...: Piezoelectric installed in the prosthesis foot Piezoelectric were installed underneath the prosthesis foot. This would use to harve...
Piezoelectric were installed underneath the prosthesis foot
Piezoelectric installed in the prosthesis foot
Piezoelectric were installed underneath the prosthesis foot.
This would use to harvesting power outfrom the lower prosthetic legs.
Reference:
Ronsek
Piezoelectrics in Prosthetics: Energy HarvestingMonday, 11 December 2017
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: How to install piezoelectric in prosthesis foot
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: How to install piezoelectric in prosthesis foot: How to install piezoelectric in prosthesis foot There are six sets of MFC Piezoelectric were installed underneath the prosthesis foot...
How to install piezoelectric in prosthesis foot
How to install piezoelectric in prosthesis foot
There are six sets of MFC Piezoelectric were
installed underneath the prosthesis foot.
This would use to harvesting power out
from the lower prosthetic legs.
Ref:Piezoelectrics in Prosthetics: Energy Harvesting
Monday, 25 September 2017
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: How to put MFC piezoelectric on foot prosthesis
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: How to put MFC piezoelectric on foot prosthesis: How to put MFC piezoelectric on foot prosthesis The movement of the prosthetic legs and the foot prosthesis would generate energy di...
How to put MFC piezoelectric on foot prosthesis
How to put MFC piezoelectric on foot prosthesis
The movement of the prosthetic legs and
the foot prosthesis would generate energy
directly from PZT and MFC piezoelectric.
The integrated low loss full wave bridge
rectifier with a high efficiency buck
converter was designed to connect directly
to PZT and MFC piezoelectric.
Reference:
Piezoelectrics in Prosthetics: Energy HarvestingThursday, 10 August 2017
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: How to put piezoelectric and hitting device toget...
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting:
How to put piezoelectric and hitting device toget...: How to put piezoelectric and hitting device together The major limitations of harvesting the energy from piezoelectric devices are not ...
How to put piezoelectric and hitting device toget...: How to put piezoelectric and hitting device together The major limitations of harvesting the energy from piezoelectric devices are not ...
How to put piezoelectric and hitting device together
The major limitations of harvesting theenergy from piezoelectric devices are not
only providing low power, but also the
difficulty to investigate their behaviour
when applying to some applications such
as prosthetic legs. Thus, the investigating
of the output voltage waveforms when hitting
the upper arm of the piezoelectric
PZT was shown.
Reference:
Piezoelectrics in Prosthetics: Energy HarvestingSlow Contact Opening Circuit Breakers
Friday, 21 July 2017
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: How to Put Piezoelectric in the Upper Prosthetic
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: How to Put Piezoelectric in the Upper Prosthetic: Piezoelectric in the Upper Prosthetic The series of piezoelectric was used to embed inside the socket area including the hitting harves...
How to Put Piezoelectric in the Upper Prosthetic
Piezoelectric in the Upper Prosthetic
The series of piezoelectric was used to embed inside the socket areaincluding the hitting harvesting kit. The
complete set would be moulded as part of
the material for the upper prosthetic leg.
Reference: Piezoelectrics in Prosthetics: Energy Harvesting
Research Information from: Ronsek.com
Friday, 14 July 2017
Tuesday, 11 July 2017
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: PSCAD/PSPICE and Piezoelectric PZT
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: PSCAD/PSPICE and Piezoelectric PZT: PSCAD/PSPICE and Piezoelectric PZT The investigation of the actual open-circuit output voltage at no load operation together with measur...
PSCAD/PSPICE and Piezoelectric PZT
PSCAD/PSPICE and Piezoelectric PZT
The investigation of the actual open-circuitoutput voltage at no load operation
together with measuring the output
parameters (resistance and capacitance) of
the PZT by RLC meter were applied and
the data were used to complete the
modelling by PSCAD/PSPICE.
It would be useful not only for the energy management circuit
analysis but also in the design system.
The output voltage waveforms was used to
discussed with the general output
characteristic of the piezoelectric PZT from
the simplified mechanical model [23].
Reference:
Ronsek.com
Piezoelectrics in Prosthetics: Energy Harvesting
Monday, 19 June 2017
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: DC motor employed with Piezoelectric
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: DC motor employed with Piezoelectric: DC motor employed with Piezoelectric This chapter presents the electromechanical technique for the piezoelectric PZT (Lead Zirconate...
DC motor employed with Piezoelectric
DC motor employed with Piezoelectric
This chapter presents the electromechanicaltechnique for the
piezoelectric PZT (Lead Zirconate Titanate).
The electromechanical characteristic of the
studied PZT would be analyzed based on
experiments while the investigation of the
energy generation was shown in Figure 6.1
which used a DC motor which employed as
the mechanical force source. It used to
control the action which would make contacts to one of the piezoelectric PZT arm
at the frequency 1 Hz. The output voltage
waveform, VP, generated from the PZT is
observed, investigated and measured the
value at each touching step.
Reference: Piezoelectrics in Prosthetics: Energy Harvesting Paperback – 25 Apr 2016 by Dr Kesorn Pechrach Weaver PhD (Author)
Monday, 5 June 2017
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: Damping Factors: Piezoelectric in Prosthetics
Dr. Kesorn Pechrach Weaver- Piezoelectrics in Prosthetics: Energy harvesting: Damping Factors: Piezoelectric in Prosthetics: Damping Factors The voltage source was used as the proposed model. The main internal parameters are as following: - the output resistan...
Damping Factors: Piezoelectric in Prosthetics
Damping Factors
The voltage source was used as theproposed model. The main internal
parameters are as following:
- the output resistance RP
- the output capacitance CP
They are measured by a RCL meter (Fluke
PM6306).
The duration of the voltage response from
Figure 6.2 can be modelled as a secondorder
parallel RLC circuit. The resonance
equation can be express as a function of
complex frequency (S1 and S2), which was
used to determine the values of R, L and C.
Reference: Piezoelectrics in Prosthetics: Energy Harvesting Paperback – April 25, 2016 by Dr Kesorn Pechrach Weaver PhD (Author)
Subscribe to:
Posts (Atom)








